Disquisition Formatting Guidelines and Templates

Graduate School Formatting Guidelines

Your disquisition must meet the Graduate School’s requirements for formatting and construction in order to obtain final approval. These requirements are intended to maintain a consistent standard of quality among all published NDSU disquisitions and to make sure that your disquisition reflects well upon your work as a student. 

Our formatting guidelines are below and in a downloadable PDF. The PDF document is the most complete record of our policies and guidelines and should be referred to for examples and more information. We recommend that you review the disquisition formatting guidelines in either form before you format your disquisition.

If you need information about general disquisition requirements, including the required order of elements and a submission checklist, visit the General Requirements page or the formatting guidelines download.

Note: The Graduate School does not edit, proofread, or otherwise review disquisitions for content. Ensure that you have proofread your text, images, and front and back matter prior to submitting your document to the Graduate School. Your disquisition content must be complete and approved by your committee before you begin the disquisition review process.

NDSU Disquisition Templates

NDSU’s Disquisition templates are designed to provide assistance in completing graduate dissertations, theses, and master’s papers. There is a template for numbered headings and a template for non-numbered headings. Each template provides the basic structure, styles, and automated Table of Contents and prefatory lists (based on styles) that will help you to quickly produce a document in keeping with our formatting guidelines.

We have a downloadable manual on using our templates (below) which explains the styles, the automations, and tips for further formatting. We strongly recommend that you consult this guide along with using our templates.

You can see a video demonstration of the templates and other matters of formatting with Word in our Word Crash Course video series. If you have any questions or would like further assistance with NDSU’s templates, please contact the Disquisition Processor or the LAIC

Template Downloads (updated February 2023)

How to Use NDSU's Disquisition Templates

TEMPLATE - Non-Numbered Headings

TEMPLATE - Auto-Numbered Headings

A Quick Guide to the Templates: Annotated Table of Contents with Styles Pane  

Guide to Page Number Problems and Landscape Page Numbering

For further templates and examples of disquisition pages, click to expand the sections of the guidelines below. You can find templates or examples for: Title Page, Disquisition Approval Page (several templates, for the different degree types and for co-chairs or single chair),Abstract, Acknowledgments, Dedication, Preface, Table of Contents, List of Tables/Figures/Schemes, List of Abbreviations/Symbols, Tables/Figures/Equations (under Equations). You can also find an example for the mandatory note for co-authored materials on our General Requirements page, under Copyright, Co-Authored Materials.

Disquisition Section Formatting

Below you can find explanations of the various sections and requirements of the disquisition. For specifications on file format, style manuals, copyright, and order of the sections of the document, see General Requirements. For formatting tutorials, see our video playlist. For Frequently Asked Questions about disquisitions, see Document Review.

Font, Line Spacing, Page Numbers, and Margins

  • Font - All text in the document (e.g. body text, headings, page numbers, text within tables, etc.) should be in the same font type, with the exception of content within figures and equations. All text in the document should be in the font size directed in the guidelines, with exceptions listed in the individual sections below. Our template is in 12-point Times New Roman. Our accepted fonts and font sizes are:
    • 10 point font: Arial, Courier New, Lucida Bright, Microsoft Sans Serif, Tahoma, Trebuchet MS, Verdana, and Computer Modern (for LaTex documents)
    • 11 point font: Century, Georgia
    • 12 point font: Garamond, Times New Roman
  • Line spacing –
    • Paragraphs and headings: Double spaced.
    • Table of Contents and List entries: Single spaced with a single blank line between each entry.
    • Block quotations: May be either single spaced or double spaced, but it should be applied consistently throughout all chapters.
    • Table/Figure/Scheme titles and notes: Single spaced.
    • Reference section entries: Follow the guidance of your style manual.
  • Paragraphs - All body text paragraphs throughout the document (including in the Abstract) must be double spaced and have a 0.5 inch first line indent.
  • Page numbers –
    • Location: Center-aligned in the footer, at least .75 inch from the bottom of the page. Cannot be obscured by page content. Ensure that all page numbers throughout the document are at the same height and position.
    • Style: Plain numbers (with no “Page” heading or other decoration).
    • Prefatory/front matter: Lower-case Roman numerals, beginning with the Abstract, which should be on page iii.
    • Body/chapters and end matter: Arabic numerals beginning with “1” on the first page following the prefatory material.
    • Landscape-oriented pages: Page numbers must appear in the left margin of the landscape page, rotated 90 degrees, so it appears in the same location and orientation as the portrait pages when the document is printed.
  • Margins –
    • One inch top, bottom, left, and right margins should be set for all pages.
    • No content may extend into these margins (except page numbers, which may be set at .75 inch). Check that tables and figures do not extend into the margins. Check that page content starts at the top 1” margin with no blank lines of space above the start of the content.

Title Page

The Title page must appear on the first page of the document.

Download the Title page template file and type your information into the appropriate fields. Then, you can copy and paste the file into your disquisition.

Additional requirements:

  • Alignment – All content on the Title page must be center-aligned. Do not indent the center alignment.
  • Font – You may set the font to be up to four points larger than the text in the body paragraphs.
  • Page numbers – Do not include a page number on the Title page
  • Required information – The following information must be personalized on the Title page:
    • Title of disquisition – Centered at the top of the page,double-spaced (line spacing 2.0), and in ALL CAPS. Do not force a line break in the title, but allow it to naturally extend to the margins.
    • Type of disquisition – Identify whether it is a thesis, a paper, or a dissertation.
    • Your full name – Include your middle name(s). No abbreviations or initials. This is for identification purposes and should be consistent with your name as given in NDSU's records (i.e., as it appears in Campus Connection).
    • Type of degree – Such as “Master of Arts”, “Master of Science”, “Doctor of Philosophy”, and so on. Written in ALL CAPS.
    • Major department or program – Use “Major Department:” or “Major Program:”, then identify your department or program on the line underneath the label. Only include a degree option if you have an official degree option granted by your department. Graduate Program and Department information can be found in the Graduate Bulletin.
    • Month and year of final examination.

Disquisition Approval Page

You must submit two separate copies of the Disquisition Approval page. Copy 1 is kept in the Graduate School files, and Copy 2 is included in the disquisition.  

Copy 1 (for Graduate School files) 

Copy 1 of the Disquisition Approval Page requires the original signatures of your committee and the chairperson of your department, and your student ID number. Copy 1 must be submitted to the Graduate School before you submit your disquisition for review.

After you have completed all of the revisions that are required for your Final Examination, complete the following steps:

  1. Download the Disquisition Approval Page from the link below. 
  2. Type the required information into the appropriate fields, and then collect the signatures of your committee members and department chair.
  3. Submit Copy 1 of the Disquisition Approval Page to the Graduate School.

 

Copy 2 (within disquisition) 

Copy 2 of the Disquisition Approval Page contains the same information as Copy 1, but do not include signatures or your student ID number on Copy 2. Instead, you must type the names of your committee members, the name of the department chairperson, and the date of approval in the appropriate fields. The Copy 2 page (within the disquisition) should not be a scanned image of the Copy 1 page. 

The NDSU template includes a Copy 2 Disquisition Approval page. If you are not using a template:

  1. Based on your degree type, download the appropriate version of Copy 2 of the Disquisition Approval Page from the links below. 
  2. Type the required information into the appropriate fields, including the names of your committee members, the name of your department chair, and the date of approval.
  3. Insert Copy 2 of the Disquisition Approval page into your disquisition as the second page, immediately after the Title page. Do not include a page number on the Disquisition Approval page.

Abstract

The Abstract is a brief summary of the content of your disquisition, including your research question or argument and your conclusions. It should be written with brevity and clarity in mind.

Your abstract could be read by people who are both inside and outside of your field of specialty, and they will use the abstract to determine if the rest of your disquisition is beneficial to them. Therefore, you should write the Abstract with a general audience in mind and use plain language (without jargon or unnecessary technical terms). It should summarize the main points of your disquisition, including the primary arguments that are made and the conclusions that are reached.

For more information about how to write an abstract, refer to the style manual of your discipline, or contact the Center for Writers.

  • Word length – Abstracts for dissertations must use 350 words or less. Abstracts for papers or theses must use 150 words or less.
  • Example Download an example abstract in the correct format.

Acknowledgements

This is an optional section.

The Acknowledgements section can give thanks to people who provided assistance or support while you researched or wrote the disquisition. If you received funding from an outside source, you can use this section to give credit to that source (when such a statement is required by the funding source).

Dedication

This is an optional section.

The Dedication usually gives a brief statement that dedicates the disquisition to a few significant people.

  • Alignment and spacing – The Dedication text should be center-aligned and double spaced. Do not vertically center the dedication text.
  • ExampleDownload an example dedication in the correct format.

Preface

This is an optional section.

The Preface can provide an autobiographical account of how the disquisition came to be, or include a significant quote that drove your research.

If you quote or refer to an outside source in the Preface, you must provide citations for those sources. For more information about citations, see References/Works Cited on this page.

Table of Contents

The Table of Contents lists the major headings that appear in the disquisition and may also outline the hierarchy of subheadings that appear in the text.

All major headings that appear in the disquisition must be included in the Table of Contents, except for the Title page, the Disquisition Approval page, and the Table of Contents. You are not required to list subheadings in the Table of Contents; however, once you include one subheading of a particular level, then you must include all subheadings of that same level.

  • Alignment and Indentation – All major headings must be aligned flush against the left margin. Subsequent levels of headings must be indented beneath the major heading that precedes them. Alignment and indentation must be consistent for all subheadings of the same level. To avoid awkward gaps between words, do not justify the alignment.
  • Dot leaders – Use dot leaders to connect the last word of each heading with the page number where that heading appears.
  • Entries – The headings that are included in the Table of Contents must be identical to the headings that appear in the text. This includes wording, punctuation, and capitalization. If you use numbered headings in the text, the headings must also be numbered in the Table of Contents. Do not allow headings to extend into the page number column. You might need to force a line break.


The Table of Contents should not have an entry for itself.

  • Spacing – Entries longer than one line should be single spaced, and there should be one consistent line of space between each entry.
  • Automated Table of Contents – Microsoft Word can create an automated Table of Contents. If you do use an automated Table of Contents, make sure that you follow the guidelines that are listed here. For more information about how to create an automated Table of Contents, contact the Disquisition Processor or  Learning and Applied Innovation Center (LAIC).
  • ExampleDownload an example Table of Contents in the correct format. 

 

List of Tables, Figures, Schemes, etc.

If you use tables, figures, schemes, or other non-text items in the chapters of your disquisition, then you must also include a list of those items in the prefatory material. Other non-text items for which a list could be created include (but are not limited to) maps, musical examples, etc. Tables, figures, schemes, and other non-text items should be integrated into the text of your disquisition. For more information, see Tables, Figures, Schemes, etc. on this page.

For more information about how to create lists for non-text elements, refer to the style manual that is used in your discipline. In many style manuals, content arranged in rows and columns is considered a table, while other visual content is considered a figure.

All tables, figures, schemes, and non-text elements that appear in the text must be included in the prefatory lists.

Do not combine multiple types of items into the same list. For example, if you use both tables and figures in your disquisition, then you must include a List of Tables and a List of Figures.

If you use tables, figures, schemes, and non-text elements in the appendix or appendices, then you must create a List of Appendix Tables, Figures, Schemes, Etc. as well, which identifies those items that appear in your appendices. Do not include appendix items in the normal Lists of Tables, Figures, Schemes, etc.

If you use equations in the disquisition, you may want to include a List of Equations in your prefatory material (this is optional). For more information, see Equations on this page.

ExampleDownload an example List of Tables, List of Figures, and List of Schemes in the correct formats.

  • Alignment – Item numbers must be aligned flush against the left margin. Page numbers must be aligned flush with the right margin. To avoid awkward gaps between words, do not justify the alignment.
  • Dot leaders – Use dot leaders to connect the last word of each title with the page number where that item appears.
  • Entries – The titles that are included in the lists must be identical to the titles that appear in the appendices. This includes wording, punctuation, and capitalization.
    • Do not allow headings to extend into the page number column. You might need to force a line break. If the title for an entry is longer than one line, indent the subsequent lines to align with the first word of the title. Subsequent lines for an entry should not align with the number for that entry.
  • Font and Margins – The font must be the same size and type as the rest of your disquisition. The margins must also be the same size as the rest of your disquisition.
  • Numbering – Items must be numbered sequentially based on the type of item, following the same numbering used by the items in the document.
  • Order – The lists should appear after the Table of Contents. The List of Tables should appear before the List of Figures. For more information, see Required Order of Elements.
  • Page numbers – Page numbers must be consistent with the rest of the disquisition. This is considered part of the prefatory material and must use lower-case Roman numerals.
  • Spacing – If an entry is longer than one line it should be single spaced, and there should be one consistent line of space between each entry.
  • Automated Lists – Microsoft Word can create automated lists. If you do use automated lists, make sure that you follow the guidelines that are listed here. For more information about how to create automated lists, contact the Disquisition Processor or the Learning and Applied Innovation Center (LAIC).

 

List of Abbreviations/Symbols/Definitions

If you use a large number of abbreviations, symbols, or defined terms, you may include a List of Abbreviations, List of Symbols, or List of Definitions. This type of list identifies the abbreviations, symbols, or glossary terms that are used in the body of the disquisition, and provides a definition for each item. This allows you to define all terms in one location for the benefit of your readers.

Ensure that the appropriate list is used for each item. For example, abbreviations or symbols that are used in the text and appendices should be included in either the  List of Abbreviations or List of Symbols. Do not include both abbreviations and symbols in a combined list.

The List of Abbreviations/Symbols/Definitions must appear after the List of Tables, Figures, Schemes, etc. For more information, see Required Order of Elements.

  • Alignment – Abbreviations, symbols, and terms must be aligned flush against the left margin. Use dot leaders to connect the abbreviation or symbol with the definition. Ensure all definitions are left-aligned at 2.5-3 inches.
    • When the definition of an item is longer than one line, subsequent lines should be aligned with the first word in the definition.
    • To avoid awkward gaps between words, do not justify the alignment.
  • Dot leaders – Use dot leaders to connect the abbreviation or symbol with its definition.
  • Order – The List of Abbreviations/Symbols/Definitions appears after the List of Tables, Figures, Schemes, etc. For more information, see Required Order of Elements.
  • Spacing – If an entry is longer than one line it should be single spaced, and there should be one consistent line of space between each entry.
  • ExampleDownload an example List of Abbreviations/Symbols in the correct format.

 

List of Appendix Tables, Figures, Schemes, etc.

If you include tables, figures, schemes, or other non-text items in your appendix (or appendices), then you must create a List of Appendix Tables, Figures, Schemes, etc. Other non-text items for which a list could be created include (but are not limited to) maps, musical examples, etc.

The Lists of Appendix Tables, Figures, Schemes, etc. appear in the prefatory material, after the List of Tables and List of Figures (which identify the non-text items that appear in the disquisition chapters), and also after the List of Abbreviations, List of Symbols, or List of Definitions (if they are included). All tables, figures, schemes, and non-text elements that appear in the appendices must be included in the prefatory lists.

Do not combine multiple types of items into the same list. For example, if you use both tables and figures in the appendices of your disquisition, then you must include a List of Appendix Tables and a List of Appendix Figures.

Do not combine the appendix items into the Lists of Tables, Figures, Schemes, etc. For more information about how to format tables, figures, schemes, and non-text items in the entire disquisition, see Tables, Figures, Schemes, etc.

  • Column headings – Each prefatory list must include two column headings that appear under the major heading and above the entries in the List: the name of the items being listed (like “Table” or “Figure”), and the page numbers on which the items appear (“Page”). The item column must be flush against the left margin, and the “Page” column must be flush against the right margin of the page. Do not add “Appendix” to the column headings, as the major heading of the List is descriptive enough.
  • Alignment – Item numbers must be aligned flush against the left margin. Page numbers must be aligned flush with the right margin. To avoid awkward gaps between words, do not justify the alignment in the entries.
  • Dot leaders – Use dot leaders to connect the last word of each title with the page number where that item appears.
  • Entries – The titles that are included in the lists must be identical to the titles that appear in the appendices. This includes wording, punctuation, and capitalization. 
    • Do not allow headings to extend into the page number column. You might need to force a line break.
    • If the title for an entry is longer than one line, indent the subsequent lines to align with the first word of the title. Subsequent lines for an entry should not align with the number for that entry.
  • Numbering – Item numbers that appear in the descriptive column (“Table”, “Figure”, etc.) must be identical to the item numbers that appear in the appendices. For example, if the first figure that appears in the first appendix is named as Figure A1, then the item number for that entry in the List of Appendix Figures must be A1.
    • If you use only one appendix, then non-text items should be numbered sequentially within the appendix, and distinguished with the letter “A” that precedes the number (such as A1, A2, A3, and so on). For more information about using non-text item in an appendix, see Appendix/Appendices.
    • If you use multiple appendices, then use letters that correspond with the letter of the appendix where the item appears. For example, the first table that appears in Appendix B would be numbered “Table B1”. For more information about using non-text items in appendices, see Appendix/Appendices.
  • Order – The lists of appendix material appears after the List of Tables, Figures, Schemes, etc. For more information, see Required Order of Elements.
  • Page numbers – Page numbers must be consistent with the rest of the disquisition. This is considered part of the prefatory material, and must use lower-case Roman numerals.
  • Spacing – If an entry is longer than one line it should be single spaced, and there should be one consistent line of space between each entry.
  • Automated Lists – Microsoft Word can create automated lists. If you do use automated lists, make sure that you follow the guidelines that are listed here. For more information about how to create automated lists, contact the Disquisition Processor or Learning and Applied Innovation Center (LAIC).

 

Chapters

The chapters contain the main content of your disquisition.

You are not required to use the label “Chapter” in the title of each chapter. However, each chapter must begin with a major heading and appear at the top of a new page.

You are not required to number each chapter unless you use numbered subheadings. For more information about numbered headings, see Headings.

Tables, figures, schemes, and non-text items should be integrated into the text of your disquisition (not bundled at the end of a chapter). For more information, see Tables, Figures, Schemes, etc.

  • Headings – Only the title of each chapter can appear as a major heading (centered, written in ALL CAPS, appears at the top of a new page). You may not have more than one heading level formatted as a major heading.
    • If each chapter is an individual paper, study, or experiment, only the title of the paper or study can appear as a major heading (such as “PAPER 1. THE EFFECT OF RAINFALL ON SUGARBEET PRODUCTION”). The section headings within the paper (such as “Abstract”, “Introduction”, “Literature Review” and so on) must appear as subheadings under the major title heading.
  • Naming – You are not required to use “Chapter” in the name of each chapter.  If you use individual papers, studies, or experiments for each chapter, then you can name the chapters “Paper 1”, “Study 1”, “Experiment 1”, and so on. However, the naming must be consistent for all chapters of such content.
  • Numbering – If you use numbered subheadings, then the heading number must precede the chapter title (such as “1. INTRODUCTION”). You may include a non-numbered introductory chapter ahead of the numbered chapters, as long as there are no subheadings or tables/figures in this non-numbered chapter.
  • Page numbers – Page numbers must be consistent with the rest of the disquisition. This is considered the body of your disquisition and must use Arabic numbers (1, 2, 3, and so on).
    • The first page of your first chapter must be numbered as page 1.

Font

All elements of the disquisition must appear in the same font. Exceptions include the font that is used within figures, illustrations, equations, or other special elements. (Tables are not included as special elements.)

All font in the disquisition must be the same color.

Do not use italic font for the title of the thesis or dissertation.

To ensure proper conversion to .pdf format, disquisitions must use one of the following fonts:

  • Arial (size 10)
  • Century (size 11)
  • Courier New (size 10)
  • Garamond (size 12)
  • Georgia (size 11)
  • Lucida Bright (size 10)
  • Microsoft Sans Serif (size 10)
  • Tahoma (size 10)
  • Times New Roman (size 12)
  • Trebuchet MS (size 10)
  • Verdana (size 10)


If you are writing a doctoral dissertation or a master’s thesis, you must embed all fonts when you convert your disquisition to a .pdf file. For more information about how to embed fonts, see Creating PDFs on the UMI ETD Administrator site.

Margins

All pages of the disquisition must use the following margins:

  • For all text, images, figures, tables, and other elements, the margins must be at least 1 inch from all edges of the page. This means that all text must appear at least 1 inch away from the edge of the paper.
  • For page numbers, the margins must be at least 0.75 inches from the bottom edge of the page.


For information about how to set up margins, contact the Technology Learning & Media Center (TLMC).

Paragraphs

All paragraphs in the disquisition must meet the following requirements.

  • Alignment – All paragraphs in the disquisition must be aligned along the left margin of the page, except on the Dedication page. Do not justify the text alignment.
  • Blank Spaces – Do not leave blank lines between paragraphs, except when they prevent orphaned or widowed text, or when you insert a major heading on the next page. For more information about major headings, see Headings.
    • When you insert a table or figure into the text, make sure to minimize the amount of space that appears above and below the item. Do not leave large amounts of space on the bottom of a page when a table, figure, or non-text item appears on the next page. You might need to shift some lines of text in order to accommodate non-text items. For more information, see Tables, Figures, Schemes, etc..
  • Font and Margins – The font must be the same size and type as the rest of your disquisition. The margins must also be the same size as the rest of your disquisition.
  • Indents – Make sure that the first lines of all paragraphs in the disquisition are indented .5 inch.
  • Spacing – Use double-spacing throughout all body paragraphs. 
  • Widowed and Orphaned Text – Avoid separating the first or last line of a paragraph from the rest of the paragraph because of a page break. These separated lines are called orphans and widows. In Microsoft Word, you can turn on “Widow/Orphan Control” to automatically prevent this from occurring in your document. 
  • ExampleDownload an example of paragraphs formatted in the correct style.

Headings

Headings identify new sections of your disquisition and must be easy to distinguish from the paragraph text. If you use several levels of headings, the different levels must be easily identifiable from both the text and from the various heading levels.

  • Orphaned text - Make sure that headings are not orphaned at the bottom of a page, and separated from the first paragraph of content. For more information about orphans, see Paragraphs.
  • Running headers – Do not use running headers at the top of each page in the disquisition. Headings should appear only at the beginning of each section.
  • For more information about heading styles, refer to the style manual of your discipline (such as MLA, APA, Chicago, etc.).

Major Headings

Major headings are used at the beginning of the main sections of the disquisition, such as the prefatory material (like the Abstract, Acknowledgements, Table of Contents, etc.), the first page of each chapter, and the appendix (or appendices).

Major headings must use the following format:

  • Appear at the top of the first page of a major section.
  • Use center alignment.
  • Use ALL CAPS in the same font type as the rest of the disquisition.
  • Use a font size no larger than four points larger than the paragraph text of the disquisition.
  • Must be included in the Table of Contents.

 

Subheadings

Subheadings appear between paragraphs of text and do not use the same formatting that is used for the major headings. If you use several levels of subheadings, the different levels of subheadings must be easily identifiable.

You can distinguish subheadings through the use of italics, underlining, bold font, and the use of title case (capitalize all major words in the subheading) or sentence-case (capitalize only the first word in the subheading).

You do not have to include every level of subheading in the Table of Contents. However, if you include one subheading of a particular level, you must include all subheadings that appear in the disquisition that are of the same level. For more information and examples of subheadings, see Table of Contents.

Subheadings must meet the following requirements:

  • Not begin a new page, unless the heading appears at a natural page break.
  • Not use identical formatting as major headings. Only major headings can use all capital letters.
  • Not be orphaned from the first paragraph in the section.

 

Numbered Headings vs. Non-numbered Headings
 

Heading numbers are optional. However, when you use heading numbers for one level of heading, all headings in the disquisition must be numbered.

If you use heading numbers, a period must follow the numbers in the text and in the Table of Contents. For example, the first subheading in the second chapter would be numbered “2.1. Subheading”.

Download examples of numbered headings.

Download examples of headings without numbers.

Equations

When you use several equations in your disquisition, you might want to number the equations within the text. However, if you number one equation in the text, then you should number all of the equations that appear in the disquisition.

 You can number the equations sequentially according to the chapter in which they appear (such as 1.1, 1.2, 1.3, 2.1, 2.2, 2.3, and so on), or you can number them in order of appearance, regardless of chapter or section (such as 1, 2, 3, 4, and so on). However, you cannot have two equations labeled as “Equation 1”, for example.

To number an equation, include the equation number in parentheses and place it to the right of the equation. For an example of how to insert an equation into the text, and how to number equations, download this example document of non-text items.

If you use a large number of equations in your disquisition, you may choose to include a List of Equations in the prefatory material. For information about how to format lists, see List of Tables, Figures, Schemes, Etc.

Tables, Figures, Schemes, etc.

Tables, figures, schemes, and other non-text items should be integrated into the text of your disquisition (not grouped at the end of a chapter). Ideally, a non-text item should be inserted on the same page where the item is first referenced in the text, or as close as possible to the first in-text reference.

For information about how to format tables, figures, schemes, and non-text items, refer to the style manual of your discipline (APA, MLA, Chicago, etc.).

Additional requirements:

  • Citations – Academic honesty is essential in all disquisitions. If you use a table, figure, or non-text item that is not your original design, you must cite the original source of the item. You may use an in-text citation in the text of the title or caption of the item, or as a footnote under the item, or add an endnote to the end of the item title with an appropriate citation in the References/Bibliography section. Refer to the style manual of your discipline for more information about citations of non-text items.
    • If you have adapted the design of a figure or non-text item from another source’s original design, then you must include the citation of the original source in the title or caption of the image. You must also state that your figure or image has been adapted from the original source.
  • Font – The font of the item titles must be same size and type as the rest of your disquisition. If the title for a non-text item is longer than one line, use single-spacing between the lines of the title.
    • Within tables, the font must be the same type as the rest of your disquisition. The size can be smaller if required to fit the table in the page margins.
    • Within figures, schemes, and other non-text items, the font can be different than the rest of your disquisition, although the item title must be in the same font type as the rest of the document.
  • Numbering – All tables, figures, schemes, and non-text items must be numbered sequentially based on the type of item (such as “Table 1” and “Figure 1”). For example, you can have a “Table 1” and a “Figure 1”, but you cannot have two tables named “Table 1”.
    • You can number the items sequentially according to the chapter in which they appear (such as 1.1, 1.2, 1.3, 2.1, 2.2, 2.3, and so on). Alternatively, you can number the items in the order that they appear, regardless of chapter or section (such as 1, 2, 3, 4, 5, and so on).
    • If you have tables, figures, schemes, etc. in your appendix or appendices, then the item number must begin with the letter of the appendix, and the numbering should begin from the start of each appendix. For example, the first table in Appendix A would be numbered as "Table A1". For more information about numbering appendix items, see the "List of Appendix Figures, Schemes, etc."
  • Spacing – Minimize the amount of blank space that appears before and after tables, figures, schemes, and other non-text elements. However, tables and figures and the titles for those items should be clearly distinguishable from the paragraph text.
    • Try to insert an item as close to its first in-text reference as possible (but not before). Items should be included at a natural break on the page (at the top or bottom of a page, or between paragraphs).
  • Titles – All tables, figures, schemes, and non-text items must have a title and a number (such as “Figure 1”), and must be included in the appropriate lists in the prefatory material. For information about how to format titles for non-text items, including punctuation and location of titles, refer to the style manual of your discipline.

References/Works Cited and Academic Honesty

Academic honesty is essential in all disquisitions. Whenever you use information from another source or refer to data that you did not create or discover, you must cite the original source of the data. This includes, but is not limited to, text, tables, figures, and other forms of data or intellectual property.

If you want to reproduce someone else’s content in your disquisition (for example, a table, figure, or model), you may be required to obtain a letter of permission from the copyright holder. Sometimes you may need permission from a publisher to reprint your own previously-published work. Make sure you understand what is and is not fair use and public domain for the materials you use, and that you understand the copyright agreement from your publications. For more information, see the Copyright section in General Requirements (I recommend reading the Kenneth Crews article under “Use of Copyrighted Material”), and review the NDSU policies on Intellectual Property (especially section 6) and Academic Responsibility and Conduct.

  • Copyright permission letters – If you have copyright letters or permission letters, you may include them in an appendix of the disquisition. There is also a place to file these alongside your disquisition in ProQuest (Supplemental Files). In either case, be sure to redact any personal information such as phone numbers, addresses, and email addresses.
  • Co-authored materials acknowledgment – If you are including co-authored materials in your disquisition, a clear and complete description of your contribution must be included as a footnote to the chapter heading in which the co-authored material appears. No co-authored materials can be included in the disquisition if your contribution is modest. For more information and an example of the mandatory note, see the Copyright > Co-Authored Materials section in General Requirements.
  • Complete, correct, and consistent –Your citations and reference sections must be complete and accurate according to the style manual of your discipline, and consistently formatted throughout. Be sure to include all information required by your style guide for each item type you include in your list. 
    • If you are using a citation generator or manager, be sure to double-check automatically-generated citations for accuracy and completeness, paying special attention to capitalization, punctuation, author(s) names, font style (italics, for example), consistency in journal titles (full names vs. abbreviations, for example), and accordance with the citation style manual you are using.
  • Citations – For in-text citations, footnotes, endnotes, or other citation types, refer to the style manual of your discipline (such as MLA, APA, Chicago, IEEE, and so on). Use one style guide throughout the disquisition—do not change from chapter to chapter, even if you had previously published the material in a different format.
  • Reference or Works Cited sections – There are two ways to place your Reference or Works Cited sections: 1) at the end of each chapter (if each chapter is a self-contained study, experiment, or article) or 2) at the end of the body of the disquisition (after the chapters but before any appendices). For reference sections within a chapter, format the section heading as a subheading of the chapter; for reference sections at the end of the disquisition, give the section a major heading, but do not number it like a chapter. Consult your discipline’s style manual for the formatting of entries in your reference section.
  • Spacing in entries – The line spacing in Reference sections should follow the directions of the style manual that is used in your discipline. They do not have to be double-spaced like paragraphs—for example, they can be single spaced with a space between each entry, they can be numbered, and/or they can have hanging indents. Follow the guidance of your style manual, and keep readability in mind. The spacing and alignment must be consistent throughout the References or Works Cited section(s).
  • Hyperlink formatting – When you include a URL in a citation, endnote, footnote, or reference entry (such as citations for internet sources or DOI), make sure that the URL is not underlined, nor in a different color, nor otherwise appearing as a hyperlink. The text can be linked, but the text should appear in standard, black (Automatic) font, with no underlining.

Resources available to you:

  • For more information about how to use the style manual most commonly used in your discipline, contact your advisor or the NDSU Center for Writers to meet with a writing consultant. The Center for Writers also maintains a resource page on citing sources.
  • You may contact the Dissertation and Thesis Coordinator with citation questions regarding our guidelines, templates, and format review, but note that we do not advise students on which citation style to use nor how to cite sources. 
  • For technical issues of formatting citations in Word, you can contact the LAIC.

Appendices

An appendix (or appendices, if you have more than one) is used to include additional material that is not integral to the body of the disquisition. Although an appendix contains supplementary material and must be numbered differently from the normal chapters, it should be considered similar to the chapters of the disquisition.

An appendix (or appendices) is an optional section.

  • Citations – If you use or reference material that is not your own, use scholarly citation practices that are consistent with the rest of the disquisition and with the style manual of your discipline. For more information, see References/Works Cited and Style manuals.
  • Font and margins – The font of the paragraph text in the appendix must be the same size and type as the rest of your disquisition. The margins must also be the same size as the rest of your disquisition.
  • Headings – Headings in the appendices must use the same formatting, style, and size as the equivalent headings in the disquisition chapters. If headings are numbered in the disquisition chapters, then appendix headings must be numbered as well, where the letter of the appendix is used instead of the chapter number (like B.1. for the first first-level subheading in the second appendix).
  • Major headings for each appendix - The first page of each appendix must include a major heading prefaced with “APPENDIX” and be formatted like other major headings in the disquisition. If you have one appendix, do not add a letter to the appendix. If you have multiple appendices, each appendix must be labeled with a capital letter (see the section below about multiple appendices).
  • Subheadings – Subheadings in the appendices must share the same formatting as equivalent subheadings in the disquisition chapters, including numbering, font size, and additional formatting. If you use numbered headings in the disquisition, then use the letter of the appendix in place of the chapter number (for example, the first first-level subheading in Appendix B would be numbered as B.1.).
  • Entries in the Table of Contents – Each appendix must be included in the Table of Contents as a major heading, just like the disquisition chapters. If you include chapter subheadings in the Table of Contents, then you must also include the subheadings that appear in the appendices. Do not identify your appendices in a list that is separate from the Table of Contents.
  • Page numbers – Page numbers must be consistent with the rest of the disquisition. This is considered part of the body of your disquisition and must use Arabic numbers (1, 2, 3, and so on). Page numbers should be continuous from the preceding chapters; do not restart page numbers at the beginning of each appendix.
  • Spacing – The line spacing and indentation of paragraphs must be consistent with the rest of the disquisition.

 

If you have one appendix

  • The appendix must be labeled – The major heading on the first page of the appendix can consist of simply “APPENDIX”, or can have an additional title (like “APPENDIX. SUPPLEMENTARY TABLES”). Do not include an additional letter for the appendix (like “APPENDIX A” – that method is for multiple appendices, as mentioned in the next subsection).
  • Tables, figures, non-text items – If you include multiple non-text item in the appendix, the number of each item must begin with “A” to indicate that it is an appendix item. Do not continue item numbering from the chapters (see the section below). You must also include a List of Appendix Tables, Figures, Schemes, etc. For more information about non-text items in the appendix, see the related section below.

 

If you have multiple appendices

  • Each appendix must be labeled with a capital letter – If you have more than one appendix, each appendix must use a different letter in the title (“APPENDIX A”, “APPENDIX B”, and so on). If each appendix contains only one type of item, such as Research Compliance forms, then you may include that information in the major heading for that appendix, like “APPENDIX A. RESEARCH COMPLIANCE FORMS”. 
    • Note: When you have multiple appendices, highly consider adding a title to each appendix that describes the content of that appendix. Then, the corresponding entries in the Table of Contents provide more information to your reader about your appendix material. For more information about labeling and titling multiple appendices, refer to the style guide of your discipline.
  • Tables, figures, non-text items – If you include multiple non-text items in an appendix, the number of each item must begin with the letter of the appendix to indicate which appendix it appears in. Do not continue item numbering from the chapters (see the related section below). You must also include a List of Appendix Tables, Figures, Schemes, etc. For more information about non-text items in the appendix, see the related section below.

 

Tables, figures, schemes, and non-text items in appendix material

  • Numbering – Non-text items that appear in an appendix must include the letter “A” in the number, or, if you have multiple appendices, use the letter of the appendix in which the item appears. Numbering must also start from the beginning of each appendix (and not be continued from the chapters). 
    • For example, the first table in the first (or only) appendix would be entitled “Table A1”. The first table in the second appendix would be labeled as “Table B1”, and so on.
  • The appendix contains a single non-text item – If a particular appendix consists of only a single non-text item, then you can integrate the title of the item into the major heading for that appendix and the item does not require an additional item title (if the style manual of your discipline allows). For example, if Appendix B consists of a single table about crop blight, then the appendix heading would read as “APPENDIX B. FREQUENCY OF CROP BLIGHT IN NORTH DAKOTA FIELDS”. If an appendix consists of a single non-text item and the item title is integrated into the title of the appendix, then the item should not be included in the appropriate List of Appendix items.
  • List of Appendix Tables, Figures, Schemes, etc. – If you include tables, figures, schemes, or other non-text items in an appendix (or appendices), then you must include a List of Appendix Tables, Figures, Schemes, etc. in the prefatory material, after the normal List of Tables, List of Figures, List of Schemes, etc. These lists of appendix items must contain information only about the non-text items that appear in the appendices. For more information about how to organize the prefatory material, see General Requirements.
" class="hidden">红袖添香全本小说